• Select the correct brush size for your shaft and application.
• Mount the brush onto the flexible shaft using the set screws.
• Always use a Shaft lock to secure the brush properly and reduce stress on the plastic hub.
• Insert the brush into the pipe and run at controlled speed.
• Use for applying low viscosity coatings or for cleaning dust and light debris.
• Remove periodically if needed to check coverage or clear buildup.

PRO TIPS:

• Experienced users place a rubber washer between the brush lock and the brush hub to prevent slipping. Please take a look at the video we created on this topic.
• Another genius idea that a customer has shared with us is that they purchased a brush for an 8mm shaft, and then cut a small piece of silicone tubing which had an inner diameter of 6mm with a 1mm tube wall. They then put the silicone tubing onto their 6mm shaft, which created a silicone barrier between their shaft and the brush. When they tightened their brush to the shaft, the set screws tightened into the silicone and spread the pressure of the set screw over a larger surface. This ensured that the brush does not slip when rotating. We have also created a video on this topic.

Points to note